Steps

Dip Coating

Spray Coating

Flame Spray Coating

Spray Lining

Roto Lining

Pre-Treatment

Removal of oil, dirt, lubrication greases, metal oxides, welding scale etc.

Removal of oil, dirt, lubrication greases, metal oxides, welding scale etc.

Removal of oil, dirt, lubrication greases, metal oxides, welding scale etc.

Removal of oil, dirt, lubrication greases, metal oxides, welding scale etc.

Removal of oil, dirt, lubrication greases, metal oxides, welding scale etc.

Pre-Heating

300°C

300°C

-

300°C

300°C

Coating

Hot substrate dipped in the fluidized tank full of powder where the powder is fluidizing when the pressurized air blown from bottom to top. The substrate will completely dip in the powder.

Electrostatically charged powder blown on the hot substrate from your regular spray coating gun.

HAPA powder blown inside the flame to the substrate. The powder melts in transit and forms a solid coating as the substrate cools down.

Fix the nozzle of the gun on the top of the rotating fire extinguisher and spray the powder inside the extinguisher.

Fill the powder inside the bottle or cylinder and then the cylinder will spin and tumble so that the cylinder can be coated uniformly. The left out powder removed out of the cylinder.

Post Heating

The article will again move to the oven to heat at 230°C for 2-3 minutes.

The article will again move to the oven to heat at 230°C for 2-3 minutes.

The article will again move to the oven to heat at 230°C for 2-3 minutes.

The article will again move to the oven to heat at 230°C for 2-3 minutes.

The article will again move to the oven to heat at 230°C for 2-3 minutes.

Applications

Wire Mesh Fence, Valve, Springs, Cable Tie, Battery Boxes

Wire Mesh Fence, Valve, Springs, Cable Tie, Battery Boxes

Wire Mesh Fence, Valve, Springs, Cable Tie, Battery Boxes, Water Proofing of Swimming Pool

Fire Extinguisher, Cylinder

Fire Extinguisher, Cylinder